Custom VMs
Page: 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12
Chris' VMs - VMX's - Snipers - Machined Bodies - Classics
Do you have a picture of your custom VM? Send it in and I'll post it!
![]() |
Intruder kit, sight rail with scope, custom side rails, an assault stock, and a silencer. |
![]() |
Intruder kit, Taso sight rail with raised sight rail and scope, an assault stock, and a silencer. (click picture for full size) Here are two more pictures of it: 1 - 2 |
![]() |
VM-EXC, Assualt stock, sight rail w/ scope, laser sight, and silencer. Here are two more pictures of it: 1 - 2 |
![]() |
Micro Boost EC, silencer, custom stock (Paintball Dave's?), sight rail w/ scope. Here are two more pictures of it: 1 - 2 |
![]() |
Car-15 stock, EC, and a silencer (TASO compensator maybe?). (click picture for full size) |
![]() |
Custom drop forward, Assualt stock, silencer, double finger trigger shoe, and a EC (or reg, can't tell). |
![]() |
Assualt stock, Lapco barrel adapter, 12" SP Tear Drop barrel, sight rail with scope, EC, double finger trigger shoe, custom drop forward. (click picture for full size) |
![]() |
Assualt stock, sight rail and raised sight rail with Adco Champ sight, and a silencer (TASO compensator maybe?). |
![]() |
"This marker was completely striped down, sand blasted then resurfaced with Mil Spec Moly Resin in Olive Drab. This baked on resin is the same surface cover used by H&K and is completely impervious to salt water immersion. The action was honed, polished and resurfaced with gun silk which creates a smooth, almost frictionless, movement which will cycle faster. The barrel is 14" and custom ported for extreme accuracy. A bipod stud has been drilled and tapped into the expansion chamber allowing for the mounting of a rifle bipod such as a Versapod or Harris Bipod. This will give a more stable firing plateform for those "Long Shots". Rifle has Quick Field Strip Screws, Sight rail, and an Assault Stock. The entire rifle is custom painted in a Woodlands Leaf pattern with matching Elbow and VL Hopper." Here's a close up of the EC. And here's a side picture. |
![]() |
"This marker was completely striped down, sand blasted then resurfaced with Mil Spec Moly Resin in Flat Charcoal Black. This baked on resin is the same surface cover used by H&K and is completely impervious to salt water immersion. The action was polished and resurfaced with gun silk which creates a smooth, almost frictionless, movement which will cycle faster. The barrel is 14" and spiral ported for extreme accuracy. A bipod stud has been drilled and tapped into the expansion chamber allowing for the mounting of a rifle bipod such as a Versapod or Harris Bipod. This will give a more stable firing plateform for those "Long Shots". Rifle has Quick Field Strip Screws, Sight rail, a Tasco AccuDot Red Dot Sight and an Assault Stock." Here's a close up of the EC. |
![]() |
A fairly basic sniper setup. 12" barrel, silencer, sight rail, scope, and assualt stock. |
![]() |
Another fairly basic sniper setup. Silencer, double finger trigger shoe, sight rail, scope, and assualt stock. |
![]() |
VM-EXC with a sight rail and scope, custom tank setup, and Thompson stock. |
![]() |
And another. More pics: 1 - 2 - 3 |
![]() |
Another sniper. Another picture here. |
![]() |
Another nice camo job. Another picture here. |
Page: 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12
Chris' VMs - VMX's - Snipers - Machined Bodies - Classics